3D Plan view (graphic image)
From the list of levels in the right part of the screen select a floor or area where the device is located. The system will show a graphical image of the same floor or area and display all devices within the subsystem selected.
To turn on/off a devices, just click on its icon on the plan. If you double click or press hold the icon for more than 1 sec, a.System will suggest you to change the device operation parameters (Fig.2). Here the user can set maximum/minimum intensity value (e.g., AC air temperature or dimmable light intensity). Auto Off / Auto On keys will activate/deactivate an automatic scenario when a set value has been reached (e.g., air temperature set value as measured by the meter).
Plan rotation and zooming
There is a set of service keys for easy control and navigation in a.System.
— device icons: these device control keys feature status indication (icon will change its color when the device is on/off and show sensor readings, etc.). With one stroke on a device key, user can switch on/off the device; pressing and holding the device key for more than 1 sec will call up a context menu to change settings of some functions.
To switch from the graphical "Plan" view to "List" view, press the service key in the right bottom corner.
You can turn devices on/off just by clicking on the icon in the list.
If the list is too long and looks hard to find the device you need, you can use a filter by device location (levels).
This key enables switching between floors within a building and surrounding areas. If there is only one Level in the system, the "Floors" key will be hidden.
Mobile Interface has some restrictions if compared to the main user interface: all the devices are displayed as a list only; there is no "Plan" view. User can use a mobile phone to turn on/off devices and change some parameters of their operation.
"Systems" menu in Mobile Interface looks as shown in Fig. 5.